Cimcool Cimclean 30
Cimclean 30 is a multi-purpose cleaner. It is an effective system cleaner for individual and central system clean out.
It is recommended for cleaning individual machine and central system reservoirs, metalworking fluid lines, premix tanks, machines and parts. It effectively removes bio-films, dirt, grit, chip deposits, insoluble soaps and oils from central systems and individual machine sumps.
Cimclean 30 contains corrosion inhibitors to protect machines and parts from rusting during the cleaning process. It is intended for use in systems working ferrous metals and can be used for general-purpose floor cleaning. It can also be used in power washers, steam cleaners and automated floor scrubbers.
Cimclean 30 can be used in three ways:
- As a cleaner: Drain used metalworking fluid and charge system with 2% Cimclean 30 (mix one part Cimclean 30 with 50 parts water). Fill reservoir as full as possible so the mixture contacts all surfaces. Circulate for at least 2-4 hours through all lines and machine tools (does not cause rust). Drain, rinse and recharge with a fresh CIMCOOL® product.
- With used fluid during shutdown: After production ceases, add one gallon of Cimclean 30 concentrate to each 50 gallons of dirty fluid (2%) in the machine reservoir or central system. Circulate the mixture for four hours or longer through all lines and machine tools. Drain, rinse and recharge with a fresh CIMCOOL® product.
- With used fluid during production: Not recommended for individual machines unless carefully supervised. During production add one gallon of Cimclean 30 to each 100 gallons of dirty fluid (1%) in the machine reservoir or central system. Circulate the mixture for 4-8 hours through all lines and machine tools. Drain, rinse and recharge with a fresh CIMCOOL® product.
Cimclean 30 is to be mixed with water for use. Always add concentrate to water. Fluid may be more difficult to mix when water temperature is below 55°F (13°C). Add no other materials to the concentrate or mix unless approved by a CIMCOOL® District Manager.
System cleaning 2%- 4% (1:50-1:25)
Floor cleaning 1%-4% (1:100-1:25)