Starrett Force/Material Testing

A World Leader in Precision and Force Measurement Tools since 1880

 

L2+

 

FMD-50K-L2P – A dual-column force measurement system optimized for high-volume production and quality control testing. The FMD-50K-L2P frame has a 50kN (11,250lbf) testing capacity ideal for tensile or compression testing. The system includes the test frame, controller and software.

  • Performs tension, compression, flexural, shear, peel and COF testing
  • Performs complex multi-stage testing using an advanced test builder application
  • Compact footprint (31″W x 29″D)
  • Analysis tools allow users to measure and display results on a single graph

**FMD-30K-L2P and FMD-10K-L2P are also available with same features as above except testing capacities of 30kN (6750lbf) and 10kN (2250lbf), respectively.**

 

FMS-5000-L2P – A single-column force measurement system optimized for high-volume production and quality control testing. The FMS-5000-L2P frame has a 5000N (1124lbf) testing capacity ideal for tensile or compression testing. The system includes the test frame, controller and software.

  • Performs tension, compression, flexural, shear, peel and COF testing
  • Performs complex multi-stage testing using an advanced test builder application
  • Compact footprint (31″W x 29″D)
  • Analysis tools allow users to measure and display results on a single graph

**FMS-2500-L2P, FMS-1000-L2P and FMS-500-L2P and are also available with same features as above except testing capacities of 2500N (560lbf), 1000N (225lbf) and 500N (112lbf), respectively.**

 

Spring Testing

 

FMD-50K-S2 – A dual-column force measurement system optimized for high-volume production and quality control testing. The FMD-50K-S2 frame has a 50kN (11,250lbf) testing capacity ideal for tensile or compression testing. The system includes the test frame, controller and software.

  • Performs tension, compression, flexural, shear, peel and COF testing
  • Performs complex multi-stage testing using an advanced test builder application
  • Compact footprint (31″W x 29″D)
  • Analysis tools allow users to measure and display results on a single graph

**FMD-30K-S2 and FMD-10K-S2 are also available with same features as above except testing capacities of 30kN (6750lbf) and 10kN (2250lbf), respectively.**

 

FMS-5000-S2 – A single-column force measurement system optimized for high-volume production and quality control testing. The FMS-5000-S2 frame has a 5000N (1124lbf) testing capacity ideal for tensile or compression testing. The system includes the test frame, controller and software.

  • Performs tension, compression, flexural, shear, peel and COF testing
  • Performs complex multi-stage testing using an advanced test builder application
  • Compact footprint (15″W x 20.25″D)
  • Analysis tools allow users to measure and display results on a single graph

**FMS-2500-S2, FMS-1000-S2 and FMS-500-S2 and are also available with same features as above except testing capacities of 2500N (560lbf), 1000N (225lbf) and 500N (112lbf), respectively.**

 

Digital Force Gages

 

The DFG is a basic force gage that measures force at an accuracy of better than 0.2% full scale. The DFG is ideal for basic tensile and compression testing. Test setup and operation is fast, efficient and easy. The DFG display shows the test direction and dynamic load during testing. Results are displayed at the completion of testing, including “Pass-Fail” when tolerance is applied. The gage will display statistics when results are saved to the gage’s internal memory, which can store up to 50 test results.

  • Six Capacities in DFG Series (10, 20, 50, 100, 200 and 500lbf)
  • Display load in lbf, N, kgf, ozf and gf units
  • Tension or Compression
  • Save Results to Memory for Statistical Calculations, or Export to PC for Detailed Analysis
  • Measure Peak Loads Quickly
  • USB and RS232 Communications
  • 10,000 Hz Data Sampling Rate

 

Force Testing (L1 Software)

 

Force Testing L1 Software represents Starrett’s most basic, computer-based force testing solution. Optimized for production and quality control testing, L1 Software is designed for easy set-up, operation and maintenance. It can be used to quickly create test methods using templates that guide users through the test setup process. Users can also perform a wide variety of testing methods, including: load limit, distance, breaking limit, cyclical count, cyclical duration, constant load and constant distance.

  • Turnkey 110 lbf force-testing system includes testing frame, L1 controller and L1 software
  • Review multiple results, including: results, graph, data, tolerance and statistics
  • Reference distance travel ruler
  • Compact design is ideal for small work space and lean manufacturing environments
  • Adjustable, magnetic travel limits
  • Speed selection dial with high-resolution display

 

Mechanical and Motorized Stands

 

Starrett’s motorized and mechanical compact force testers are built for high-volume, lean manufacturing production areas and are ideal for tension and compression applications.

  • Ideal for tension, compression, flexural, cyclical, shear and friction applications
  • Use with L1 software and a 2-in-1 tablet PC or with DFC and DFG force gages
  • Multiple, Easy-to-Use Operating Modes: manual, automatic, continuous, gage control or software control
  • Easily perform load, distance, break, cyclical, constant load and distance testing
  • Reference distance travel ruler
  • Compact design is ideal for small work spaces and lean manufacturing environments
  • Adjustable, magnetic travel limits
  • Speed selection dial with high-resolution display